| Step | | Procedure & Parts & Tools |
| 1 |
|
LAY THE MACHINE DOWN SO THE FRONT COVER IS FACING UP. REST THE MACHINE ON BOARDS SO THAT THE FILTER ON THE BACK DOESNT GET BROKEN.
|
| 2 |
|
REMOVE THE 4 SCREWS AND LIFT UP ON THE FRONT COVER TO REMOVE IT.
| Screwdriver-phillips |
|
|
| 3 |
|
LOCATE THE COMPRESSOR AT THE BOTTOM OF THE MACHINE.
|
| 4 |
|
HOLD THE 3 SCREWS IN PLACE WITH YOUR HAND AND TURN THE NUT DRIVER TO REMOVE THE SCREWS.
| Nut driver-metric 7mm |
|
|
| 5 |
|
LOCATE THE 2 WHITE WIRES FROM THE COMPRESSOR TO THE WHITE TERMINAL BLOCK. PULL UP ON THE WIRES TO REMOVE THEM.
|
| 6 |
|
LOCATE THE 2 BLACK WIRES FROM THE COMPRESSOR TO THE WHITE TERMINAL BLOCK. LOOSEN THE 2 SCREWS AND PULL THE BLACK WIRES FROM THE TERMINAL BLOCK.
| Screwdriver-flat tip |
|
|
| 7 |
|
PULL THE HOSE TO DISCONNECT IT FROM THE COMPRESSOR. REMOVE THE COMPRESSOR FROM THE MACHINE.
|
| 8 |
|
LOCATE THE HOSE COMING FROM THE BOTTOM OF THE TANK. PULL HOSE TO DISCONNECT IT FROM THE ELBOW.
|
| 9 |
|
CHECK ELBOW FOR A CLOG. INSERT A SMALL SCREWDRIVER INTO THE ELBOW TO CHECK FOR A CLOG. REMOVE CLOG.
|
| 10 |
|
REVERSE STEPS 1 THRU 9 TO REASSEMBLE THE MACHINE.
|